Paper, plastic, woven PP and metal packaging plants.
Very high operating temperatures at corrugating rolls, extruder heads and dryers degrade lubricants and form deposits; paper dust, calcium carbonate and plastic dust cause sticking, bearing and slide wear; heavy loads and high speeds throw lubricant, affecting product quality.
chosen by each machine's operating temperature and the base oil in it, not one oil for the whole station. Objective: in a station with several machines, choose the oil by each machine's conditions and the base oil in it, and change the oil without carrying old deposits into the new oil. Read more →
Packaging · Dong Nai · Nov 2018 – Aug 2019Work Hop Tien has done at plants in this industry, and technical articles on the lubrication points this industry meets most.
Which oil your screw compressor needs is written on the machine itself: the manual, the oil label on the door and the discharge temperature under load. How to read all three and decide when to change the oil.
TechnicalTrade names change; base oils do not. How the four base oils in rotary screw compressor oil behave in Vietnamese conditions, why they cannot be mixed, and a table of which switches need a drain and which a full flush.
ComplianceThe lubricant records an FSSC 22000 or BRCGS auditor usually asks to see, the nonconformities that cost plants points, and how to file everything so you can answer in minutes.
TechnicalViscosity, TAN, water, iron, copper and silicon: what each one says about a screw compressor, with reference limits and three common patterns.
Synthetic PAG/POE-based air compressor oil for oil-flooded screw compressors running in high-temperature, high-humidity…
IllustrationHydrocracked mineral-based oil for air and light-gas compressors, sulfur-free, at a competitive cost; oil life up to 4,000 hours…
IllustrationSpecialty multipurpose grease meeting NSF H1 food safety requirements, with a synthetic hydrocarbon base and polyurea-aluminum…
Multipurpose grease for extremely high temperatures, based on perfluoropolyether (PFPE)/PTFE, -30 to +260 °C; compatible with…
Synthetic ester/SHC chain oil with very good adhesion and thermal stability, temperature range -20 to +300 °C; forms a…
Multipurpose spray chain lubricant meeting NSF H1 food safety requirements, low viscosity, penetrates chain links well; for…
