High-performance, anti-wear, fully synthetic chain oil in aerosol form, developed specifically for lubricating chains and conveyor mechanisms in food freezing equipment. NSF H1 registered, allowing use where incidental food contact is possible.
Illustration of the manufacturer's product family; actual packaging and label depend on the batch.
Send the oil you use and the temperature at the point; a Hop Tien engineer checks compatibility and old residue and replies within 24 working hours.
Find an alternative oil| Product form | Aerosol |
|---|---|
| Oil type | Synthetic oil |
| Color | Colorless |
| Density at 15 °C | 831 kg/m³ |
| Flash point | >210 °C |
| Pour point | < -60 °C |
| Kinematic viscosity at 40 °C | 32 mm²/s |
| Kinematic viscosity at 100 °C | 6.5 mm²/s |
| Operating temperature | -50 to +140 °C |
| Lowest short-term temperature | -60 °C (lower limit, per TDS) |
Typical values per the manufacturer's TDS; not acceptance specifications. Full data in the TDS.
Per the manufacturer's technical literature; actual results depend on each machine's operating conditions.
400 ml aerosol
Ester-based oils are generally miscible with mineral oil (the TDS does not state this separately), but mixing in service is not recommended: old oil and carbon residue reduce the cleaning action and life of the new oil. For a changeover: remove old residue from chains and rails, run out the old oil and then feed the new oil; check compatibility with paints, plastics and seals per the TDS. A Hop Tien engineer assists at the machine.
Price depends on pack size (400 ml aerosol) and quantity; Hop Tien quotes within 24 working hours with delivery terms (warehouse at Song Than Industrial Park, nationwide delivery). Include the machine and the lubrication point and how oil is applied so an engineer can confirm the right product.
Hop Tien is an authorized distributor of FUCHS (CASSIDA brand) in Vietnam: goods are imported officially with a certificate of origin (CO), certificate of quality (CQ), CoA per batch and the Vietnamese supplementary label required by law. How to check origin is explained on the Genuine products page.
Fill in the "Get documents by email" form on this page: the manufacturer's TDS (English) is sent automatically. The SDS, copies of the NSF H1, Halal, Kosher registration, CO, CQ and the batch CoA are sent by an engineer within 24 working hours; the SDS also accompanies every delivery.
Yes. Hop Tien proposes a trial on one machine or one chain section, recording temperature, consumption and residue so the plant decides on data; Hop Tien technicians guide the removal of old residue and the feed-rate settings.
Industries: Food & beverage
Synthetic extreme-pressure (EP) grease, NSF H1 food-grade, for rolling bearings and enclosed gears in food, beverage and…
IllustrationISO VG 220 for mid-size, medium-speed enclosed gearboxes, -40 to +140 °C. High-performance synthetic gear oil, NSF H1 food-grade…
Synthetic ISO VG 100 air compressor oil, NSF H1 and ISO 21469 food-grade, developed for screw, vane and reciprocating air…
