Anti-wear synthetic gear oil for worm gears and heavily loaded gears, with high micropitting resistance, for food and beverage processing equipment.
Illustration of the manufacturer's product family; actual packaging and label depend on the batch.
Send the oil you use; a Hop Tien engineer checks the base oil, seals and flushing procedure and replies within 24 working hours.
Find an alternative oil| Base oil | Synthetic oil |
|---|---|
| Color | Clear, amber |
| Density at 15 °C | 1067 kg/m³ |
| Flash point | 254 °C |
| Pour point | -36 °C |
| Kinematic viscosity at 40 °C | 477 mm²/s |
| Kinematic viscosity at 100 °C | 83 mm²/s |
| Viscosity index | 260 |
| Operating temperature | -30 to +160 °C |
| Lowest short-term temperature | -30 °C (lower limit, per TDS) |
| FZG | >12 |
| NSF Reg. No. | 144787 |
Typical values per the manufacturer's TDS; not acceptance specifications. Full data in the TDS.
Per the manufacturer's technical literature; actual results depend on each machine's operating conditions.
22 L pail
No. Polyglycol (PAG) oils are not miscible with mineral oil, PAO or esters; residual old oil causes haze, separation and deposits. For a changeover: drain the old oil at every low point, clean the reservoir and oil lines, replace the oil filter and separator element, fill once, run briefly and drain, then fill again; check tank coatings and seal materials against the manufacturer's TDS. A Hop Tien engineer writes the procedure for each machine.
Price depends on pack size (22 L pail) and quantity; Hop Tien quotes within 24 working hours with delivery terms (warehouse at Song Than Industrial Park, nationwide delivery). Include the machine and the viscosity grade currently used so an engineer can confirm the right product.
Hop Tien is an authorized distributor of FUCHS (CASSIDA brand) in Vietnam: goods are imported officially with a certificate of origin (CO), certificate of quality (CQ), CoA per batch and the Vietnamese supplementary label required by law. How to check origin is explained on the Genuine products page.
Fill in the "Get documents by email" form on this page: the manufacturer's TDS (English) is sent automatically. The SDS, copies of the NSF H1, Halal, Kosher registration, CO, CQ and the batch CoA are sent by an engineer within 24 working hours; the SDS also accompanies every delivery.
Yes. Hop Tien proposes a trial on one gearbox or one hydraulic system, logging oil temperature, noise and leakage, with an oil sample analyzed at 500 hours so the plant decides on data; Hop Tien technicians guide draining the old oil, flushing if the base oil differs, and filling the new oil.
Industries: Food & beverage
Synthetic extreme-pressure (EP) grease, NSF H1 food-grade, for rolling bearings and enclosed gears in food, beverage and…
IllustrationISO VG 220 for mid-size, medium-speed enclosed gearboxes, -40 to +140 °C. High-performance synthetic gear oil, NSF H1 food-grade…
Synthetic ISO VG 100 air compressor oil, NSF H1 and ISO 21469 food-grade, developed for screw, vane and reciprocating air…
