High-grade PAG-based industrial gas compressor oil, almost free from dilution by hydrocarbon gases. For oil-flooded screw compressors, centrifugal compressors and liquid ring vacuum pumps in heavy, high-temperature gas streams.
Illustration of the manufacturer's product family; actual packaging and label depend on the batch.
Send the oil you use; a Hop Tien engineer checks the base oil, seals and flushing procedure and replies within 24 working hours.
Find an alternative oil| Base oil | Polyalkylene glycol (PAG) |
|---|---|
| Viscosity at 40 °C | 63.12 mm²/s |
| Viscosity at 100 °C | 9.10 mm²/s |
| Viscosity index | 121 |
| Flash point | 236 °C |
| Pour point | -46 °C |
| Density at 15.6 °C | 1.147 g/ml |
| Copper strip corrosion (D130) | 1A |
| Rust prevention (D665 A) | Pass |
| Product range | 1507-32 / 46 / 68 / 100 / 150 |
Typical values per the manufacturer's TDS; not acceptance specifications. Full data in the TDS.
Per the manufacturer's technical literature; actual results depend on each machine's operating conditions.
208 L drum
No. PAG does not mix with mineral oil or PAO; the system must be fully drained and may need flushing. This is a typical case where an engineer should check before the changeover.
Price depends on pack size (208 L drum) and quantity; Hop Tien quotes within 24 working hours with delivery terms (warehouse at Song Than Industrial Park, nationwide delivery). Include the machine and the viscosity grade currently used so an engineer can confirm the right product.
Hop Tien is the authorized distributor of Lubrizol Fluid Engineering (CPI brand) in Vietnam: goods are imported officially with a certificate of origin (CO), certificate of quality (CQ), CoA per batch and the Vietnamese supplementary label required by law. How to check origin is explained on the Genuine products page.
Fill in the "Get documents by email" form on this page: the manufacturer's TDS (English) is sent automatically. The SDS, CO, CQ and the batch CoA are sent by an engineer within 24 working hours; the SDS also accompanies every delivery.
Yes. Hop Tien proposes a trial on one machine, logging running hours and temperature, with an oil sample analyzed at 500 hours so the plant decides on data; Hop Tien technicians help drain the old oil, change filters and fill the new oil.
Industries: Oil & gas, marine, Power generation
Ammonia (NH₃) refrigeration compressor oil with a hydrotreated mineral base, low volatility and a pour point of -43 °C, suitable…
IllustrationHigh-grade synthetic oil based on Polyalphaolefin (PAO), with high thermal and oxidation stability. Designed for industrial…
IllustrationPAG-based refrigeration compressor oil with a high-performance additive system, developed specifically for refrigeration systems…
