Synthetic compressor oil based on polyalkylene glycol (PAG), with high thermal/oxidation stability, very low volatility and a high viscosity index. Specifically designed for propane refrigeration systems and oil-flooded screw compressors, including high-temperature conditions.
Illustration of the manufacturer's product family; actual packaging and label depend on the batch.
Send the oil you use; a Hop Tien engineer checks the base oil, seals and flushing procedure and replies within 24 working hours.
Find an alternative oil| Base oil | PAG |
|---|---|
| Viscosity at 40 °C (D445) | 66.75 mm²/s |
| Viscosity at 100 °C (D445) | 10.4 mm²/s |
| Viscosity index (D2270) | 143 |
| Density at 15.6 °C (D4052) | 1.008 g/ml |
| Flash point/fire point (D92) | 263/277 °C |
| Pour point (D5950) | -44 °C |
| Rust test (D665) part A | Pass |
| Copper strip corrosion (D130) | 1B |
Typical values per the manufacturer's TDS; not acceptance specifications. Full data in the TDS.
Per the manufacturer's technical literature; actual results depend on each machine's operating conditions.
208 L drum
No. Polyglycol (PAG) oils are not miscible with mineral oil, PAO or esters; residual old oil causes haze, separation and deposits. For a changeover: drain the old oil at every low point, clean the reservoir and oil lines, replace the oil filter and separator element, fill once, run briefly and drain, then fill again; check tank coatings and seal materials against the manufacturer's TDS. A Hop Tien engineer writes the procedure for each machine.
Price depends on pack size (208 L drum) and quantity; Hop Tien quotes within 24 working hours with delivery terms (warehouse at Song Than Industrial Park, nationwide delivery). Include the machine and the viscosity grade currently used so an engineer can confirm the right product.
Hop Tien is the authorized distributor of Lubrizol Fluid Engineering (CPI brand) in Vietnam: goods are imported officially with a certificate of origin (CO), certificate of quality (CQ), CoA per batch and the Vietnamese supplementary label required by law. How to check origin is explained on the Genuine products page.
Fill in the "Get documents by email" form on this page: the manufacturer's TDS (English) is sent automatically. The SDS, CO, CQ and the batch CoA are sent by an engineer within 24 working hours; the SDS also accompanies every delivery.
Yes. Hop Tien proposes changing over one refrigeration compressor, logging monthly oil top-up, discharge temperature and the condition of oil drained at low points, with an oil sample analyzed at 500 hours so the plant decides on data; Hop Tien technicians guide draining the old oil and cleaning the filter and separator.
Industries: Oil & gas, marine, Seafood processing
Ammonia (NH₃) refrigeration compressor oil with a hydrotreated mineral base, low volatility and a pour point of -43 °C, suitable…
IllustrationHigh-grade synthetic oil based on Polyalphaolefin (PAO), with high thermal and oxidation stability. Designed for industrial…
IllustrationHigh-grade PAG-based industrial gas compressor oil, almost free from dilution by hydrocarbon gases. For oil-flooded screw…
