Synthetic compressor oil based on polyalphaolefin (PAO) with built-in seal protection technology, high oxidation stability, low volatility and a very low pour point. Especially suitable for ammonia compressors with evaporating temperatures below -39 °C.
Illustration of the manufacturer's product family; actual packaging and label depend on the batch.
Send the oil you use; a Hop Tien engineer checks the base oil, seals and flushing procedure and replies within 24 working hours.
Find an alternative oil| Base oil | PAO |
|---|---|
| Viscosity at 40 °C (D445) | 95.02 mm²/s |
| Viscosity at 100 °C (D445) | 14.89 mm²/s |
| Viscosity index (D2270) | 164 |
| Density at 20 °C (D4052) | 0.836 g/ml |
| Flash point/fire point (D92) | 262/284 °C |
| Pour point (D97) | -58 °C |
| Water content (D6304) | <50 ppm |
Typical values per the manufacturer's TDS; not acceptance specifications. Full data in the TDS.
Per the manufacturer's technical literature; actual results depend on each machine's operating conditions.
208 L drum
Per the TDS, PAO oils are compatible with mineral oil, so no transition oil is needed when the machine is clean; the old oil must still be drained fully and the oil filter and separator element replaced so that residue and aged oil are not carried into the new fill. Do not top up over PAG or POE oils (not miscible) – those cases require flushing. A Hop Tien engineer confirms the base oil in use before the change.
Price depends on pack size (208 L drum) and quantity; Hop Tien quotes within 24 working hours with delivery terms (warehouse at Song Than Industrial Park, nationwide delivery). Include the machine and the viscosity grade currently used so an engineer can confirm the right product.
Hop Tien is the authorized distributor of Lubrizol Fluid Engineering (CPI brand) in Vietnam: goods are imported officially with a certificate of origin (CO), certificate of quality (CQ), CoA per batch and the Vietnamese supplementary label required by law. How to check origin is explained on the Genuine products page.
Fill in the "Get documents by email" form on this page: the manufacturer's TDS (English) is sent automatically. The SDS, CO, CQ and the batch CoA are sent by an engineer within 24 working hours; the SDS also accompanies every delivery.
Yes. Hop Tien proposes changing over one refrigeration compressor, logging monthly oil top-up, discharge temperature and the condition of oil drained at low points, with an oil sample analyzed at 500 hours so the plant decides on data; Hop Tien technicians guide draining the old oil and cleaning the filter and separator.
Industries: Food & beverage, Seafood processing, Oil & gas, marine
Ammonia (NH₃) refrigeration compressor oil with a hydrotreated mineral base, low volatility and a pour point of -43 °C, suitable…
IllustrationHigh-grade synthetic oil based on Polyalphaolefin (PAO), with high thermal and oxidation stability. Designed for industrial…
IllustrationHigh-grade PAG-based industrial gas compressor oil, almost free from dilution by hydrocarbon gases. For oil-flooded screw…
