High-quality diester-based compressor cleaner combined with an additive system that allows it to be used as a short-term lubricant. It dissolves varnish and disperses sludge in the system without shutting down the machine, and can be used for up to 500 hours. Fully compatible with mineral oil and PAO, and suitable for flushing when changing over to CPI lubricants.
Illustration of the manufacturer's product family; actual packaging and label depend on the batch.
Send the oil you use; a Hop Tien engineer checks the base oil, seals and flushing procedure and replies within 24 working hours.
Find an alternative oil| Base oil | Diester |
|---|---|
| Viscosity at 40 °C | 39.79 mm²/s |
| Viscosity at 100 °C | 5.51 mm²/s |
| Viscosity index | 60 |
| Density at 15.6 °C | 0.9683 g/ml |
| Flash point | 235 °C |
| Fire point | 263 °C |
| Pour point | -47 °C |
| Copper strip corrosion (D130) | 1A |
| Rust prevention (D665) | Pass |
| Short-term service time | up to 500 hours |
Typical values per the manufacturer's TDS; not acceptance specifications. Full data in the TDS.
Per the manufacturer's technical literature; actual results depend on each machine's operating conditions.
18.9 L pail
Price depends on pack size (18.9 L pail) and quantity; Hop Tien quotes within 24 working hours with delivery terms (warehouse at Song Than Industrial Park, nationwide delivery). Include the machine and the viscosity grade currently used so an engineer can confirm the right product.
Hop Tien is the authorized distributor of Lubrizol Fluid Engineering (CPI brand) in Vietnam: goods are imported officially with a certificate of origin (CO), certificate of quality (CQ), CoA per batch and the Vietnamese supplementary label required by law. How to check origin is explained on the Genuine products page.
Fill in the "Get documents by email" form on this page: the manufacturer's TDS (English) is sent automatically. The SDS, CO, CQ and the batch CoA are sent by an engineer within 24 working hours; the SDS also accompanies every delivery.
There is no "trial sample" for a cleaner. CPI COMP CLEAN II replaces the oil for one short cycle (up to 500 hours per the TDS) on one machine with deposits; the machine is then drained, the filter and separator replaced and new oil filled. A Hop Tien engineer writes the procedure and takes before-and-after samples so the plant sees the result in numbers.
Industries: Other industries, Oil & gas, marine
Hydrocarbon oil with cleaning and lubricating properties, odorless, tasteless and well compatible with metals and elastomers…
Synthetic base oil, aerosol spray; H1 (InS) registered; penetrates, cleans and removes rust; for the food, beverage and…
Lubricating and cleaning oil for knitting machines, based on paraffinic hydrocarbons with very good penetration. Its low…
