ISO VG 68 hydraulic oil based on Group II hydrotreated mineral oil, with anti-wear and anti-corrosion additives; oil life 2–3 times that of Group I mineral oils per FUCHS literature, very low deposits (low varnish), very good air release and water separation.
Illustration of the manufacturer's product family; actual packaging and label depend on the batch.
Send the oil you use; a Hop Tien engineer checks the base oil, seals and flushing procedure and replies within 24 working hours.
Find an alternative oil| Base oil | Hydrotreated mineral |
|---|---|
| ISO VG grade | 68 |
| Viscosity at 40 °C / 100 °C | 68 / 9.0 mm²/s |
| Viscosity index | 108 |
| Density at 15 °C | 867 kg/m³ |
| Flash point (Cleveland) | 230 °C |
| Pour point | -33 °C |
| Neutralization number | 0.5 mg KOH/g |
| Air release (DIN ISO 9120) | 6 min |
| Copper corrosion | 1-100 A3 |
| Steel rust protection (distilled / salt water) | No rust / no rust |
| Specifications | DIN 51524-2 HLP · ISO 6743-4 HM · Vickers V104C vane pump test |
| Approvals | Bosch Rexroth RDE 90245 · Denison HF-0 |
| Product range | B 10 – B 100 PLUS |
Typical values per the manufacturer's TDS; not acceptance specifications. Full data in the TDS.
Per the manufacturer's technical literature; actual results depend on each machine's operating conditions.
205 L drum · 18 L pail
Price depends on pack size (205 L drum, 18 L pail) and quantity; Hop Tien quotes within 24 working hours with delivery terms (warehouse at Song Than Industrial Park, nationwide delivery). Include the machine and the viscosity grade currently used so an engineer can confirm the right product.
Hop Tien is an authorized distributor of FUCHS in Vietnam: products are supplied by FUCHS Vietnam (locally produced or imported depending on the grade), with a CoA per batch, compliant labelling and origin documents for imported goods. How to check origin is explained on the Genuine products page.
Fill in the "Get documents by email" form on this page: the manufacturer's TDS (English) is sent automatically. The SDS, CO, CQ and the batch CoA are sent by an engineer within 24 working hours; the SDS also accompanies every delivery.
Yes. Hop Tien proposes a trial on one gearbox or one hydraulic system, logging oil temperature, noise and leakage, with an oil sample analyzed at 500 hours so the plant decides on data; Hop Tien technicians guide draining the old oil, flushing if the base oil differs, and filling the new oil.
Industries: Precision machining, Wood & furniture, Rubber & tires, Packaging, Cement & steel, Other industries
Highly refined mineral-based industrial gear oil, ISO VG 220 per DIN 51517-3 CLP, approved by Flender; for circulation-lubricated…
IllustrationISO VG 150 for faster-running, moderately loaded gearboxes, circulation or splash lubricated. Heavy-duty mineral gear oil, EP/AW…
IllustrationISO VG 320 for slow-running enclosed gearboxes under heavy and shock loads such as mill gears, circulation or splash lubricated…
