LUBCON THERMOPLEX 2 TML

Name: LUBCON THERMOPLEX 2 TML
Brand: LUBCON
SKU: HT-LUBCON-THERMOPLEX-2TML

Synthetic ester-based grease with lithium thickener for high-speed, low-noise rolling bearings under high mechanical loads; operates from -30 to 160 °C.

Data per the manufacturer's TDS

Request a quote Request a trial sample Ask an engineer on Zalo

Using another grease?

Send the grease you use; a Hop Tien engineer checks the thickener, base-oil viscosity and miscibility and replies within 24 working hours.

Find an alternative grease

Technical data

Base oil	Ester
Thickener	Lithium soap
NLGI	2
Base oil viscosity at 40 °C	55 mm²/s
Temperature range	-30 to 160 °C
Dropping point	>180 °C
Speed factor n×dm	1,300,000 mm/min
Noise level	≤II/1

Typical values per the manufacturer's TDS; not acceptance specifications. Full data in the TDS.

Applications

High-speed rolling bearings in textile machines, machine tools, electric motors and high-load positions

Benefits

Reduced heat generation
Low friction
Low noise
Long lubrication life
Suitable for high speeds and loads

Per the manufacturer's technical literature; actual results depend on each machine's operating conditions.

Pack sizes

100 g tube · 400 g cartridge · 1 kg can · 25 kg pail · 180 kg drum

Price, ordering and genuine supply

Quotation within 24 working hours. Send the pack size, quantity and machine; an engineer confirms the NLGI grade and grease type before quoting. Request a quote →

Genuine products. Hop Tien is an authorized distributor of FUCHS in Vietnam; goods are imported officially with CO/CQ and a CoA per batch. How to verify genuine products →

Delivery. Warehouse at Song Than Industrial Park (Ho Chi Minh City), delivery nationwide; SDS with every delivery.

Technical documents

📄 TDS – manufacturer's technical data sheet (English, sent automatically by email)

📄 SDS – safety data sheet: sent within 24 working hours on request · with every delivery

📄 CoA per batch (with your order)

Case study: LUBCON grease trial on draw frames and ring spinning frames at a spinning mill, Mekong Delta (Jun 2017).

Frequently asked questions about LUBCON THERMOPLEX 2 TML

Can LUBCON THERMOPLEX 2 TML be pumped in over another grease?

Only if the thickener is the same and the manufacturer confirms compatibility. Different thickeners (lithium, lithium complex, polyurea, calcium sulfonate, aluminum complex, barium complex, PTFE…) can soften or harden when mixed. When changing grease type: clean the old grease out of the bearing, or purge it with short relubrication intervals before switching fully, per the manufacturer's TDS. A Hop Tien engineer checks the thickener of the grease in use.

How much does LUBCON THERMOPLEX 2 TML cost?

Price depends on pack size (100 g tube, 400 g cartridge, 1 kg can, 25 kg pail, 180 kg drum) and quantity; Hop Tien quotes within 24 working hours with delivery terms (warehouse at Song Than Industrial Park, nationwide delivery). Include the machine and the grease (NLGI grade) currently used so an engineer can confirm the right product.

Where can I buy genuine LUBCON THERMOPLEX 2 TML in Vietnam?

Hop Tien is an authorized distributor of FUCHS (LUBCON brand) in Vietnam: goods are imported officially with a certificate of origin (CO), certificate of quality (CQ), CoA per batch and the Vietnamese supplementary label required by law. How to check origin is explained on the Genuine products page.

Where do I get the TDS and SDS for LUBCON THERMOPLEX 2 TML?

Fill in the "Get documents by email" form on this page: the manufacturer's TDS (English) is sent automatically. The SDS, CO, CQ and the batch CoA are sent by an engineer within 24 working hours; the SDS also accompanies every delivery.

Can I trial LUBCON THERMOPLEX 2 TML before switching the whole plant?

Yes. Hop Tien proposes a trial on one machine or one bearing group, logging housing temperature, relubrication interval and quantity, assessed after the trial so the plant decides on data; Hop Tien technicians guide removal of old grease and the correct fill.

Industries: Textiles, Wood & furniture, Packaging, Precision machining, Other industries