LUBCON TURMOGREASE N 2

Name: LUBCON TURMOGREASE N 2
Brand: LUBCON
SKU: HT-LUBCON-TURMOGREASE-N-2

Fully synthetic special grease based on SHC/ester oil with a polyurea thickener. Operating temperature range from -40 °C to +160 °C. Suitable for long-term and lifetime lubrication, with a wide range of applications in industrial plants and the automotive industry.

Data per the manufacturer's TDS

Request a quote Request a trial sample Ask an engineer on Zalo

Using another grease?

Send the grease you use; a Hop Tien engineer checks the thickener, base-oil viscosity and miscibility and replies within 24 working hours.

Find an alternative grease

Technical data

DIN designation	KPHC 2 P-40
Color	beige
Base oil / thickener	SHC/Ester / Polyurea
Base oil viscosity at 40 °C / 100 °C	150 / 19 mm²/s
Temperature range	-40 °C to +160 °C
NLGI grade	2
Penetration	265-295 mm/10
Dropping point	> 250 °C
Water resistance	0-90
Corrosion protection (SKF-Emcor)	0/0
Speed factor n·dm	600,000 mm/min
FE9 life (A/1500/3000-140 F50)	>1000 h
Density at 20 °C	0.88 g/cm³

Typical values per the manufacturer's TDS; not acceptance specifications. Full data in the TDS.

Applications

Rolling and plain bearings in mechanical engineering (e.g., mixers) and the automotive industry (wheel bearings, water pumps, gearshift rods, hinges, etc.)
Bearings in machines operating in wet environments, pumps, washing machines, special sealed bearings
Textile industry: dyeing machine pump bearings, guide shafts and rollers of bleaching machines, electric motor bearings.

Benefits

Stable against liquid acidic and alkaline cleaning agents
Suitable for long-term and lifetime lubrication
Resistant to cold water, hot water and steam
High-temperature resistance.

Per the manufacturer's technical literature; actual results depend on each machine's operating conditions.

Pack sizes

1 kg tin

Price, ordering and genuine supply

Quotation within 24 working hours. Send the pack size, quantity and machine; an engineer confirms the NLGI grade and grease type before quoting. Request a quote →

Genuine products. Hop Tien is an authorized distributor of FUCHS in Vietnam; goods are imported officially with CO/CQ and a CoA per batch. How to verify genuine products →

Delivery. Warehouse at Song Than Industrial Park (Ho Chi Minh City), delivery nationwide; SDS with every delivery.

Technical documents

📄 TDS – manufacturer's technical data sheet (English, sent automatically by email)

📄 SDS – safety data sheet: sent within 24 working hours on request · with every delivery

📄 CoA per batch (with your order)

Frequently asked questions about LUBCON TURMOGREASE N 2

Can LUBCON TURMOGREASE N 2 be pumped in over another grease?

Only if the thickener is the same and the manufacturer confirms compatibility. Different thickeners (lithium, lithium complex, polyurea, calcium sulfonate, aluminum complex, barium complex, PTFE…) can soften or harden when mixed. When changing grease type: clean the old grease out of the bearing, or purge it with short relubrication intervals before switching fully, per the manufacturer's TDS. A Hop Tien engineer checks the thickener of the grease in use.

How much does LUBCON TURMOGREASE N 2 cost?

Price depends on pack size (1 kg tin) and quantity; Hop Tien quotes within 24 working hours with delivery terms (warehouse at Song Than Industrial Park, nationwide delivery). Include the machine and the grease (NLGI grade) currently used so an engineer can confirm the right product.

Where can I buy genuine LUBCON TURMOGREASE N 2 in Vietnam?

Hop Tien is an authorized distributor of FUCHS (LUBCON brand) in Vietnam: goods are imported officially with a certificate of origin (CO), certificate of quality (CQ), CoA per batch and the Vietnamese supplementary label required by law. How to check origin is explained on the Genuine products page.

Where do I get the TDS and SDS for LUBCON TURMOGREASE N 2?

Fill in the "Get documents by email" form on this page: the manufacturer's TDS (English) is sent automatically. The SDS, CO, CQ and the batch CoA are sent by an engineer within 24 working hours; the SDS also accompanies every delivery.

Can I trial LUBCON TURMOGREASE N 2 before switching the whole plant?

Yes. Hop Tien proposes a trial on one machine or one bearing group, logging housing temperature, relubrication interval and quantity, assessed after the trial so the plant decides on data; Hop Tien technicians guide removal of old grease and the correct fill.

Industries: Textiles, Other industries