Synthetic multipurpose grease with polyurea thickener, for continuous operation from -30 to 180 °C and short-term up to 220 °C. For rolling and plain bearings under load and shock load in industrial equipment.
Illustration of the manufacturer's product family; actual packaging and label depend on the batch.
Send the grease you use; a Hop Tien engineer checks the thickener, base-oil viscosity and miscibility and replies within 24 working hours.
Find an alternative grease| Base oil | Blend of synthetic oils |
|---|---|
| Thickener | Polyurea |
| Base oil viscosity at 40 °C | 460 mm²/s |
| NLGI grade | 2 |
| Temperature range | -30 to 180 °C, short-term 220 °C |
| Dropping point | >260 °C |
| Water resistance | 0-90 |
| SKF-Emcor rust test | 0/0 |
| Speed factor n×dm | 300,000 mm/min |
Typical values per the manufacturer's TDS; not acceptance specifications. Full data in the TDS.
Per the manufacturer's technical literature; actual results depend on each machine's operating conditions.
25 kg pail
Only if the thickener is the same and the manufacturer confirms compatibility. Different thickeners (lithium, lithium complex, polyurea, calcium sulfonate, aluminum complex, barium complex, PTFE…) can soften or harden when mixed. When changing grease type: clean the old grease out of the bearing, or purge it with short relubrication intervals before switching fully, per the manufacturer's TDS. A Hop Tien engineer checks the thickener of the grease in use.
Price depends on pack size (25 kg pail) and quantity; Hop Tien quotes within 24 working hours with delivery terms (warehouse at Song Than Industrial Park, nationwide delivery). Include the machine and the grease (NLGI grade) currently used so an engineer can confirm the right product.
Hop Tien is an authorized distributor of FUCHS (LUBCON brand) in Vietnam: goods are imported officially with a certificate of origin (CO), certificate of quality (CQ), CoA per batch and the Vietnamese supplementary label required by law. How to check origin is explained on the Genuine products page.
Fill in the "Get documents by email" form on this page: the manufacturer's TDS (English) is sent automatically. The SDS, CO, CQ and the batch CoA are sent by an engineer within 24 working hours; the SDS also accompanies every delivery.
Yes. Hop Tien proposes a trial on one machine or one bearing group, logging housing temperature, relubrication interval and quantity, assessed after the trial so the plant decides on data; Hop Tien technicians guide removal of old grease and the correct fill.
Industries: Textiles, Wood & furniture, Packaging, Other industries
Fully synthetic specialty industrial grease with a polyurea calcium special soap thickener; resistant to hot and cold water…
Refined mineral oil-based grease with a calcium sulfonate complex soap thickener, especially resistant to water and chemicals: it…
Multipurpose grease for extremely high temperatures, based on perfluoropolyether (PFPE)/PTFE, -30 to +260 °C; compatible with…
