Food-grade grease, NLGI 2, with aluminum special soap thickener; H1 and 3H (InS) registered. Resistant to hot and cold water; high load-carrying capacity; good wear and oxidation protection; suitable for lubricating equipment in the food, beverage, pharmaceutical and packaging industries.
Send the grease you use; a Hop Tien engineer checks the thickener, base-oil viscosity and miscibility and replies within 24 working hours.
Find an alternative grease| Base oil / thickener | White oil / aluminum special soap |
|---|---|
| Base oil viscosity at 40 °C / 100 °C | 100 / 11.7 mm²/s |
| Temperature range | -25 °C to +120 °C |
| NLGI grade | 2 (cone penetration 265–295) |
| Dropping point | >160 °C |
| Water resistance | 1–90 |
| Speed factor n·dm | 300,000 mm/min |
| Density at 20 °C | 0.89 g/cm³ |
Typical values per the manufacturer's TDS; not acceptance specifications. Full data in the TDS.
Per the manufacturer's technical literature; actual results depend on each machine's operating conditions.
1 kg tin
Only if the thickener is the same and the manufacturer confirms compatibility. Different thickeners (lithium, lithium complex, polyurea, calcium sulfonate, aluminum complex, barium complex, PTFE…) can soften or harden when mixed. When changing grease type: clean the old grease out of the bearing, or purge it with short relubrication intervals before switching fully, per the manufacturer's TDS. A Hop Tien engineer checks the thickener of the grease in use.
Price depends on pack size (1 kg tin) and quantity; Hop Tien quotes within 24 working hours with delivery terms (warehouse at Song Than Industrial Park, nationwide delivery). Include the machine and the grease (NLGI grade) currently used so an engineer can confirm the right product.
Hop Tien is an authorized distributor of FUCHS (LUBCON brand) in Vietnam: goods are imported officially with a certificate of origin (CO), certificate of quality (CQ), CoA per batch and the Vietnamese supplementary label required by law. How to check origin is explained on the Genuine products page.
Fill in the "Get documents by email" form on this page: the manufacturer's TDS (English) is sent automatically. The SDS, copies of the H1 (InS), 3H (InS), Halal, Kosher registration, CO, CQ and the batch CoA are sent by an engineer within 24 working hours; the SDS also accompanies every delivery.
Yes. Hop Tien proposes a trial on one machine or one bearing group, logging housing temperature, relubrication interval and quantity, assessed after the trial so the plant decides on data; Hop Tien technicians guide removal of old grease and the correct fill.
Industries: Food & beverage, Seafood processing, Packaging
IllustrationLubricating grease for the food industry, NSF H1 registered, suitable for points with possible incidental food…
IllustrationLubricating grease specifically for the food industry; NSF H1 registered, suitable for applications with possible incidental food…
IllustrationSpecialty multipurpose grease meeting NSF H1 food safety requirements, with a synthetic hydrocarbon base and polyurea-aluminum…
