Synthetic-based lubricating grease with polyurea aluminum special soap thickener with high adhesion to metal; H1 (InS) registered, for points with possible incidental food contact; withstands shock loads, vibration and contact with hot and cold water.
Illustration of the manufacturer's product family; actual packaging and label depend on the batch.
Send the grease you use; a Hop Tien engineer checks the thickener, base-oil viscosity and miscibility and replies within 24 working hours.
Find an alternative grease| Base oil | Synthetic |
|---|---|
| Thickener | Polyurea aluminum special soap |
| Color | Beige |
| NLGI grade | 2 |
| Cone penetration | 265–295 (0.1 mm) |
| Viscosity at 40 °C | 250 mm²/s |
| Viscosity at 100 °C | 31 mm²/s |
| Operating temperature | -30 to 160 °C |
| Dropping point | > 200 °C |
| Density at 20 °C | 0.84 g/cm³ |
| Speed factor | 500,000 mm/min |
Typical values per the manufacturer's TDS; not acceptance specifications. Full data in the TDS.
Per the manufacturer's technical literature; actual results depend on each machine's operating conditions.
1 kg tin
Only if the thickener is the same and the manufacturer confirms compatibility. Different thickeners (lithium, lithium complex, polyurea, calcium sulfonate, aluminum complex, barium complex, PTFE…) can soften or harden when mixed. When changing grease type: clean the old grease out of the bearing, or purge it with short relubrication intervals before switching fully, per the manufacturer's TDS. A Hop Tien engineer checks the thickener of the grease in use.
Price depends on pack size (1 kg tin) and quantity; Hop Tien quotes within 24 working hours with delivery terms (warehouse at Song Than Industrial Park, nationwide delivery). Include the machine and the grease (NLGI grade) currently used so an engineer can confirm the right product.
Hop Tien is an authorized distributor of FUCHS (LUBCON brand) in Vietnam: goods are imported officially with a certificate of origin (CO), certificate of quality (CQ), CoA per batch and the Vietnamese supplementary label required by law. How to check origin is explained on the Genuine products page.
Fill in the "Get documents by email" form on this page: the manufacturer's TDS (English) is sent automatically. The SDS, copies of the H1 (InS), Halal, Kosher registration, CO, CQ and the batch CoA are sent by an engineer within 24 working hours; the SDS also accompanies every delivery.
Yes. Hop Tien proposes a trial on one machine or one bearing group, logging housing temperature, relubrication interval and quantity, assessed after the trial so the plant decides on data; Hop Tien technicians guide removal of old grease and the correct fill.
Industries: Food & beverage, Packaging
IllustrationSpecialty multipurpose grease meeting NSF H1 food safety requirements, with a synthetic hydrocarbon base and polyurea-aluminum…
Multipurpose spray chain lubricant meeting NSF H1 food safety requirements, low viscosity, penetrates chain links well; for…
IllustrationISO VG 320 for heavily loaded, slow-running oven chains and conveyors that need a thicker oil film. Ester chain oil up to +250…
