ISO VG 320 for heavily loaded, slow-running oven chains and conveyors that need a thicker oil film. Ester chain oil up to +250 °C, H1 (InS) registered, no solid residues, new-generation antioxidants, for food lines.
Illustration of the manufacturer's product family; actual packaging and label depend on the batch.
Send the oil you use and the temperature at the point; a Hop Tien engineer checks compatibility and old residue and replies within 24 working hours.
Find an alternative oil| Base oil | Ester |
|---|---|
| Viscosity at 40 °C / 100 °C | 330 / 34 mm²/s |
| Viscosity index | 145 |
| Operating temperature range | Up to +250 °C |
| Pour point | < -20 °C |
| Flash point | > 250 °C |
| Density at 20 °C | 1.02 g/cm³ |
Typical values per the manufacturer's TDS; not acceptance specifications. Full data in the TDS.
Per the manufacturer's technical literature; actual results depend on each machine's operating conditions.
20 L pail
Ester-based oils are generally miscible with mineral oil (the TDS does not state this separately), but mixing in service is not recommended: old oil and carbon residue reduce the cleaning action and life of the new oil. For a changeover: remove old residue from chains and rails, run out the old oil and then feed the new oil; check compatibility with paints, plastics and seals per the TDS. A Hop Tien engineer assists at the machine.
Price depends on pack size (20 L pail) and quantity; Hop Tien quotes within 24 working hours with delivery terms (warehouse at Song Than Industrial Park, nationwide delivery). Include the machine and the lubrication point and how oil is applied so an engineer can confirm the right product.
Hop Tien is an authorized distributor of FUCHS (LUBCON brand) in Vietnam: goods are imported officially with a certificate of origin (CO), certificate of quality (CQ), CoA per batch and the Vietnamese supplementary label required by law. How to check origin is explained on the Genuine products page.
Fill in the "Get documents by email" form on this page: the manufacturer's TDS (English) is sent automatically. The SDS, copies of the H1 (InS), Halal, Kosher registration, CO, CQ and the batch CoA are sent by an engineer within 24 working hours; the SDS also accompanies every delivery.
Yes. Hop Tien proposes a trial on one machine or one chain section, recording temperature, consumption and residue so the plant decides on data; Hop Tien technicians guide the removal of old residue and the feed-rate settings.
Industries: Food & beverage, Packaging
IllustrationISO VG 220 for faster-running oven and dryer chains and automatic lube systems needing a thinner oil. Ester chain oil up to +250…
IllustrationSpecialty multipurpose grease meeting NSF H1 food safety requirements, with a synthetic hydrocarbon base and polyurea-aluminum…
Multipurpose spray chain lubricant meeting NSF H1 food safety requirements, low viscosity, penetrates chain links well; for…
