ISO VG 460, the heaviest grade, for large worm gear reducers and heavily loaded gears, -30 to +180 °C. High-temperature synthetic polyglycol oil, NSF H1, meets CLP per DIN 51517, for food-plant gears and chains.
Illustration of the manufacturer's product family; actual packaging and label depend on the batch.
Send the oil you use and the temperature at the point; a Hop Tien engineer checks compatibility and old residue and replies within 24 working hours.
Find an alternative oil| Base oil | Synthetic (polyglycol) |
|---|---|
| Viscosity at 40 °C | 442 mm²/s |
| Viscosity at 100 °C | 80 mm²/s |
| Viscosity index (VI) | 260 |
| Operating temperature range | -30 °C to +180 °C |
| Pour point | -40 °C |
| Flash point | > 250 °C |
| Copper corrosion | 1a |
| FZG load stage | > 12 |
| Density at 20 °C | 1.07 g/cm³ |
Typical values per the manufacturer's TDS; not acceptance specifications. Full data in the TDS.
Per the manufacturer's technical literature; actual results depend on each machine's operating conditions.
20 L pail · 5 L can
No. Polyglycol (PAG) oils are not miscible with mineral oil, PAO or esters; residual old oil causes haze, separation and deposits. For a changeover: drain the old oil at every low point, clean the reservoir and oil lines, replace the oil filter and separator element, fill once, run briefly and drain, then fill again; check tank coatings and seal materials against the manufacturer's TDS. A Hop Tien engineer writes the procedure for each machine.
Price depends on pack size (20 L pail, 5 L can) and quantity; Hop Tien quotes within 24 working hours with delivery terms (warehouse at Song Than Industrial Park, nationwide delivery). Include the machine and the lubrication point and how oil is applied so an engineer can confirm the right product.
Hop Tien is an authorized distributor of FUCHS (LUBCON brand) in Vietnam: goods are imported officially with a certificate of origin (CO), certificate of quality (CQ), CoA per batch and the Vietnamese supplementary label required by law. How to check origin is explained on the Genuine products page.
Fill in the "Get documents by email" form on this page: the manufacturer's TDS (English) is sent automatically. The SDS, copies of the NSF H1, Halal, Kosher registration, CO, CQ and the batch CoA are sent by an engineer within 24 working hours; the SDS also accompanies every delivery.
Yes. Hop Tien proposes a trial on one machine or one chain section, recording temperature, consumption and residue so the plant decides on data; Hop Tien technicians guide the removal of old residue and the feed-rate settings.
Industries: Food & beverage
IllustrationISO VG 150, the lightest grade in the range, for small worm gear reducers and conveyor chains, -30 to +160 °C. High-temperature…
IllustrationISO VG 220, the mid grade most used for industrial worm gear reducers and oven chains, -30 to +160 °C. High-temperature synthetic…
IllustrationSpecialty multipurpose grease meeting NSF H1 food safety requirements, with a synthetic hydrocarbon base and polyurea-aluminum…
