Synthetic heat transfer fluid based on partially hydrogenated terphenyl for closed-loop liquid-phase heating systems, bulk fluid up to 357 °C and film up to 375 °C; according to PARATHERM documentation, it shares the same chemistry with, and is compatible with, the terphenyl fluids commonly used in thermal oil heaters, so it is an option for systems currently running this type of fluid.
Illustration of the manufacturer's product family; actual packaging and label depend on the batch.
Send the oil you use; a Hop Tien engineer checks the base oil, seals and flushing procedure and replies within 24 working hours.
Find an alternative oil| Chemistry (per manufacturer) | Partially hydrogenated terphenyl |
|---|---|
| Operating temperature range | 11 to 357 °C (direct-fired heaters up to 343 °C) |
| Maximum film temperature | 375 °C |
| Viscosity at 40 °C | 31.4 mm²/s |
| Viscosity at 100 °C | 4.5 mm²/s |
| Viscosity at 343 °C | 0.45 mm²/s |
| Density at 15.5 °C | 1,012 kg/m³ |
| Closed-cup flash point (ASTM D93) | > 157 °C |
| Average boiling point (101 kPa) | 354 °C |
Typical values per the manufacturer's TDS; not acceptance specifications. Full data in the TDS.
Per the manufacturer's technical literature; actual results depend on each machine's operating conditions.
208 L drum
Price depends on pack size (208 L drum) and quantity; Hop Tien quotes within 24 working hours with delivery terms (warehouse at Song Than Industrial Park, nationwide delivery). Include the machine and the heater type, operating temperature and the fluid currently used so an engineer can confirm the right product.
Hop Tien is the authorized distributor of Lubrizol Fluid Engineering (PARATHERM brand) in Vietnam: goods are imported officially with a certificate of origin (CO), certificate of quality (CQ), CoA per batch and the Vietnamese supplementary label required by law. How to check origin is explained on the Genuine products page.
Fill in the "Get documents by email" form on this page: the manufacturer's TDS (English) is sent automatically. The SDS, CO, CQ and the batch CoA are sent by an engineer within 24 working hours; the SDS also accompanies every delivery.
Yes, but not as a one-machine trial: a heat transfer system is one closed loop. Hop Tien samples and analyzes the fluid in use, then proposes a top-up or partial replacement with before-and-after data so the plant decides on data.
Industries: Textiles, Wood & furniture, Oil & gas, marine, Rubber & tires, Other industries
IllustrationSynthetic alkyl aromatic heat transfer fluid for closed-loop liquid-phase heating systems, bulk fluid up to 357 °C and film up to…
IllustrationSynthetic alkyl aromatic heat transfer fluid for closed-loop liquid-phase heating systems up to 302 °C (direct-fired heaters 290…
IllustrationHeat transfer fluid based on high-purity hydrotreated mineral oil, NSF HT-1 registered (heat transfer fluid for incidental food…
