SOLEST LT-32

Name: SOLEST LT-32
Brand: SOLEST
SKU: HT-SOLEST-LT32

ISO VG 32 with a -54 °C pour point and good low-temperature miscibility with HFCs, for reciprocating, scroll, rotary, screw and centrifugal compressors. POE refrigeration oil for HFC/HCFC/HFO systems, high film strength.

Data per the manufacturer's TDS

Request a quote Ask an engineer on Zalo

Using another oil?

Send the oil you use; a Hop Tien engineer checks the base oil, seals and flushing procedure and replies within 24 working hours.

Find an alternative oil

Technical data

Base oil	Polyol ester (POE)
ISO VG viscosity grade	32
Viscosity at 40 °C (D445)	30.7 mm²/s
Viscosity at 100 °C	5.4 mm²/s
Viscosity index (VI)	110
Pour point	-54 °C
Flash point	248 °C
Fire point	273 °C
Density at 15 °C	0.9744 g/ml
Dielectric strength	48.2 kV
Water content	< 50 ppm

Typical values per the manufacturer's TDS; not acceptance specifications. Full data in the TDS.

Applications

Commercial and industrial refrigeration and air-conditioning compressors using HFC, HCFC and HFO refrigerants
Suitable for reciprocating, screw, centrifugal, scroll and rotary compressors
For factory fill and OEM changeover/service.

Benefits

Very good low-temperature miscibility with HFC refrigerants
Thermal stability extends system life
Improved oil management increases efficiency
Effective corrosion protection
Very good bearing lubrication
Environmentally friendly (biodegradable).

Per the manufacturer's technical literature; actual results depend on each machine's operating conditions.

Pack sizes

18.9 L pail

Price, ordering and genuine supply

Quotation within 24 working hours. Send the pack size, quantity and machine; an engineer confirms the viscosity grade before quoting. Request a quote →

Genuine products. Hop Tien is the authorized distributor of Lubrizol Fluid Engineering in Vietnam; goods are imported officially with CO/CQ and a CoA per batch. How to verify genuine products →

Delivery. Warehouse at Song Than Industrial Park (Ho Chi Minh City), delivery nationwide; SDS with every delivery.

Technical documents

📄 TDS – manufacturer's technical data sheet (English, sent automatically by email)

📄 SDS – safety data sheet: sent within 24 working hours on request · with every delivery

📄 CoA per batch (with your order)

Frequently asked questions about SOLEST LT-32

What should be checked when changing from mineral oil to SOLEST LT-32?

POE oils are strongly hygroscopic: keep cans sealed, charge quickly and evacuate the system before charging. When retrofitting from mineral oil to POE/HFC, drain and replace the oil several times until the residual mineral oil is below the compressor OEM's limit (typically a few percent, per OEM literature); do not use POE in ammonia systems. A Hop Tien engineer provides the procedure for each machine.

How much does SOLEST LT-32 cost?

Price depends on pack size (18.9 L pail) and quantity; Hop Tien quotes within 24 working hours with delivery terms (warehouse at Song Than Industrial Park, nationwide delivery). Include the machine and the viscosity grade currently used so an engineer can confirm the right product.

Where can I buy genuine SOLEST LT-32 in Vietnam?

Hop Tien is the authorized distributor of Lubrizol Fluid Engineering (SOLEST brand) in Vietnam: goods are imported officially with a certificate of origin (CO), certificate of quality (CQ), CoA per batch and the Vietnamese supplementary label required by law. How to check origin is explained on the Genuine products page.

Where do I get the TDS and SDS for SOLEST LT-32?

Fill in the "Get documents by email" form on this page: the manufacturer's TDS (English) is sent automatically. The SDS, CO, CQ and the batch CoA are sent by an engineer within 24 working hours; the SDS also accompanies every delivery.

Can SOLEST LT-32 be trialled on part of the system?

An HFC refrigeration system is a closed loop and cannot be trialled in part; the safe approach is to change over one stand-alone compressor following the full procedure (drain, evacuate, charge quickly, measure water in oil) and monitor oil pressure, temperature and moisture for three months before rolling out. A Hop Tien engineer writes the procedure for each machine.

Industries: Seafood processing, Food & beverage, Power generation, Oil & gas, marine