Filter by brand, category and industry. Every product has typical data, certifications and technical documents. Prices are not shown; quotation within 24 working hours.
Ammonia (NH₃) refrigeration compressor oil with a hydrotreated mineral base, low volatility and a pour point of -43 °C, suitable…
IllustrationHigh-grade synthetic oil based on Polyalphaolefin (PAO), with high thermal and oxidation stability. Designed for industrial…
IllustrationHigh-grade PAG-based industrial gas compressor oil, almost free from dilution by hydrocarbon gases. For oil-flooded screw…
IllustrationPAG-based refrigeration compressor oil with a high-performance additive system, developed specifically for refrigeration systems…
Synthetic PAG/POE-based air compressor oil for oil-flooded screw compressors running in high-temperature, high-humidity…
IllustrationHydrocracked mineral-based oil for air and light-gas compressors, sulfur-free, at a competitive cost; oil life up to 4,000 hours…
Polyol ester (POE) refrigeration compressor oil, ISO VG 170, for refrigeration systems using HFC refrigerants; a factory-fill and…
Polyol ester (POE) refrigeration compressor oil, ISO VG 68, for refrigeration systems using HFC refrigerants; a factory-fill and…
POE refrigeration compressor oil, ISO VG 32, for HFC reciprocating and scroll compressors in small and medium capacity commercial…
IllustrationSpecialty multipurpose grease meeting NSF H1 food safety requirements, with a synthetic hydrocarbon base and polyurea-aluminum…
Fully synthetic specialty industrial grease with a polyurea calcium special soap thickener; resistant to hot and cold water…
Refined mineral oil-based grease with a calcium sulfonate complex soap thickener, especially resistant to water and chemicals: it…
Multipurpose grease for extremely high temperatures, based on perfluoropolyether (PFPE)/PTFE, -30 to +260 °C; compatible with…
Mineral-based lubricating oil designed for circular knitting machines. It helps keep knitting needles clean, improves wear…
Synthetic ester/SHC chain oil with very good adhesion and thermal stability, temperature range -20 to +300 °C; forms a…
Multipurpose spray chain lubricant meeting NSF H1 food safety requirements, low viscosity, penetrates chain links well; for…
IllustrationISO VG 320 for heavily loaded, slow-running oven chains and conveyors that need a thicker oil film. Ester chain oil up to +250…
IllustrationConveyor lubricant based on mineral oil and PTFE, H1 (InS) registered, suitable for food and beverage…
IllustrationMineral-based lubricant and anti-stick/release agent meeting NSF H1 and 3H food safety requirements, suitable for food, beverage…
Synthetic ester/SHC chain oil for the wood industry, heat resistant up to 250 °C, with very good wear protection and adhesion…
IllustrationSpecialty high-temperature ester-based chain oil for bending rods in continuous presses, applied through automatic lubrication…
Highly refined mineral-based industrial gear oil, ISO VG 220 per DIN 51517-3 CLP, approved by Flender; for circulation-lubricated…
IllustrationISO VG 68 hydraulic oil based on Group II hydrotreated mineral oil, with anti-wear and anti-corrosion additives; oil life 2–3…
IllustrationMineral-based open gear grease containing graphite solid lubricant, for open gears of rotary kilns and ball mills in cement and…
IllustrationWater-miscible semi-synthetic cutting fluid designed for a wide range of machining operations on cast iron, carbon steel…
Synthetic extreme-pressure (EP) grease, NSF H1 food-grade, for rolling bearings and enclosed gears in food, beverage and…
IllustrationISO VG 220 for mid-size, medium-speed enclosed gearboxes, -40 to +140 °C. High-performance synthetic gear oil, NSF H1 food-grade…
Synthetic ISO VG 100 air compressor oil, NSF H1 and ISO 21469 food-grade, developed for screw, vane and reciprocating air…
Aprons made from specialized rubber compounds for ring spinning frames, roving frames and other spinning equipment. Designed for…
Rubber cots for the top rollers of spinning drafting systems, gripping, guiding and controlling the fibers during drafting…
IllustrationHeat transfer fluid based on high-purity hydrotreated mineral oil, NSF HT-1 registered (heat transfer fluid for incidental food…
IllustrationHeat transfer fluid based on highly refined hydrotreated paraffinic oil, NSF HT-1 registered (heat transfer fluid for incidental…
IllustrationHeat transfer fluid based on highly refined hydrotreated paraffinic oil, NSF HT-1 registered (heat transfer fluid for incidental…
IllustrationSynthetic heat transfer fluid based on partially hydrogenated terphenyl for closed-loop liquid-phase heating systems, bulk fluid…
IllustrationSynthetic alkyl aromatic heat transfer fluid for closed-loop liquid-phase heating systems, bulk fluid up to 357 °C and film up to…
IllustrationSynthetic alkyl aromatic heat transfer fluid for closed-loop liquid-phase heating systems up to 302 °C (direct-fired heaters 290…
Hydrocarbon oil with cleaning and lubricating properties, odorless, tasteless and well compatible with metals and elastomers…
IllustrationSynthetic PAO and ester air compressor oil, NSF H1 registered, with high thermal and oxidation stability and low volatility…
Mineral oil-based grease with lithium/calcium special soap thickener and extreme-pressure additives; adhesive, with high…
Synthetic polyol ester (POE) refrigeration compressor oil, ISO VG 220, with high film strength and thermal stability; optimized…
Synthetic polyol ester (POE) refrigeration compressor oil, ISO VG 68, with good thermal stability and bearing lubrication…
Synthetic ester-based grease with lithium thickener for high-speed, low-noise rolling bearings under high mechanical loads…
Synthetic SHC/ester-based grease with lithium special soap thickener, designed for very high-speed rolling bearings; operates…
Inorganically bonded MoS₂ solid lubricant that forms a dry lubricating film with a low coefficient of friction; withstands…
Assembly lubricant based on synthetic hydrocarbon, containing graphite and molybdenum disulfide; high thermal stability, changes…
Anti-seize grease based on synthetic hydrocarbon with an inorganic thickener, for extremely high temperatures; changes to dry…
Ester-based lubricating grease with calcium complex soap thickener, meets H1 registration requirements per the manufacturer's…
Synthetic anti-wear hydraulic oil, ISO VG 32 viscosity grade, NSF H1 registered for food safety; operating temperature range -60…
Silicone oil based on polymethylsiloxane, with a high viscosity index, low vapor pressure and a wide temperature range of -50 to…
Food-grade grease, NLGI 2, with aluminum special soap thickener; H1 and 3H (InS) registered. Resistant to hot and cold water…
Food-grade grease, NLGI 3; silicone grease with PTFE thickener; NSF H1 registered; high temperature resistance and stable in hot…
Multipurpose grease, NLGI 2; extreme pressure (EP) performance; lithium hydroxystearate thickener, synthetic base oil; for…
IllustrationISO VG 150, the lightest grade in the range, for small worm gear reducers and conveyor chains, -30 to +160 °C. High-temperature…
IllustrationISO VG 460, the heaviest grade, for large worm gear reducers and heavily loaded gears, -30 to +180 °C. High-temperature synthetic…
Synthetic base oil, aerosol spray; H1 (InS) registered; penetrates, cleans and removes rust; for the food, beverage and…
IllustrationISO VG 32 for hydraulic systems, compressors and high-speed chains, -50 to +120 °C. Multipurpose synthetic oil, NSF H1…
IllustrationISO VG 150 for faster-running, moderately loaded gearboxes such as textile gearboxes and winches, up to +120 °C. Mineral…
ISO VG 320 for slow-running, heavily loaded gearboxes such as rolling mills, crushers and mining machinery, up to +120 °C…
IllustrationLubricating grease for the food industry, NSF H1 registered, suitable for points with possible incidental food…
IllustrationSynthetic semi-fluid gear grease with synthetic base oil and polyurea aluminum special soap thickener with high adhesion to…
Synthetic-based lubricating grease; suitable for applications with high specific loads and a wide temperature range; H1…
IllustrationISO VG 220 for gearboxes, loaded gears and slow-running chains, -35 to +140 °C. Multipurpose synthetic oil, NSF H1 registered…
IllustrationLubricating grease with calcium sulfonate complex thickener; high mechanical stability, withstands severe operating conditions…
IllustrationSynthetic lubricating oil containing PTFE, with good adhesion and rust protection for machine parts that are frequently cleaned…
IllustrationSynthetic-based lubricating grease with polyurea aluminum special soap thickener with high adhesion to metal; H1 (InS)…
IllustrationLubricating grease specifically for the food industry; NSF H1 registered, suitable for applications with possible incidental food…
Food-grade grease designed for high temperatures; synthetic base oil with polyurea aluminum special soap thickener; NSF H1…
IllustrationISO VG 220 for faster-running oven and dryer chains and automatic lube systems needing a thinner oil. Ester chain oil up to +250…
IllustrationISO VG 220, the mid grade most used for industrial worm gear reducers and oven chains, -30 to +160 °C. High-temperature synthetic…
IllustrationHigh-performance anti-wear synthetic chain oil; specially developed for machinery in food and beverage processing and packaging…
IllustrationAt 24 mm²/s the lighter grade, used as a release agent for grills and baking moulds and as a can-forming oil. Multipurpose…
IllustrationISO VG 32, the heavier grade, used in heat transfer systems and as absorption oil in edible oil solvent recovery. Multipurpose…
IllustrationISO VG 460 for heavily loaded, slow-running enclosed gearboxes, -35 to +140 °C. High-performance synthetic gear oil, NSF H1…
IllustrationMultipurpose anti-wear synthetic hydraulic oil for machinery in food and beverage processing and…
IllustrationAnti-wear synthetic gear oil for worm gears and heavily loaded gears, with high micropitting resistance, for food and beverage…
IllustrationSemi-synthetic grease with modified aluminum complex thickener for food and beverage processing equipment, especially pet food…
Synthetic extreme-pressure (EP), water-resistant grease with calcium sulfonate complex thickener and synthetic base oil, for…
High-temperature synthetic grease with inorganic thickener and synthetic base oil, for machinery in food and beverage processing…
Special high-load grease based on perfluorinated (PFPE) base oil with lithium special soap thickener. Operating temperature range…
High-viscosity perfluoropolyether grease thickened with PTFE. Operating temperature range from -20 °C to +250 °C. Designed for…
IllustrationSpecial high-temperature lubricating paste based on synthetic oil with white solid lubricants. Resistant to many corrosive…
IllustrationFood-grade cutting, cleaning and preservation oil based on high-purity hydrocarbons. H1 registered (InS), designed for the paper…
IllustrationFully synthetic ester-based cutting, cleaning and preservation oil for the paper and corrugated board packaging industry. The…
Multipurpose synthetic lubricating oil based on synthetic hydrocarbons, with very good spreading properties. A special…
IllustrationSpecial ester-based chain oil containing temperature-stable oxidation inhibitors and special extreme-pressure (EP) additives. The…
Fully synthetic silicone-based multipurpose lubricating fluid in aerosol spray form. Specially formulated to lubricate equipment…
High-quality, aging-resistant multipurpose EP (extreme-pressure) grease formulated from selected base oils, lithium soap…
High-temperature multipurpose EP grease based on lithium-complex soap, designed for long-term lubrication. The product offers…
IllustrationISO VG 100, the grade between 68 and 220, for HFC refrigeration and A/C compressors whose manuals call for a heavier oil than VG…
ISO VG 220, the heaviest grade in the range, for HFC refrigeration and A/C compressors whose manuals specify a heavy oil…
Highly refined naphthenic mineral refrigeration compressor oil. Designed to meet OEM compressor lubrication requirements under…
ISO VG 32, the lightest grade in the range, pour point -40 °C, for small and medium HFC refrigeration and A/C compressors needing…
ISO VG 120 for centrifugal, screw and reciprocating compressors needing a viscosity between VG 68 and 170. POE refrigeration oil…
ISO VG 170 for large screw, centrifugal and reciprocating compressors needing a heavier oil than VG 120. POE refrigeration oil…
ISO VG 32 with a -54 °C pour point and good low-temperature miscibility with HFCs, for reciprocating, scroll, rotary, screw and…
IllustrationSynthetic polyol ester (POE) refrigeration compressor oil specially formulated for refrigeration compressors using HCFC…
Special-purpose grease based on SHC/ester, using a polyurea thickener combined with black solid lubricants. Service temperature…
IllustrationSpecial lubricating oil for textile machines, based on (pure) white oil. With high wetting ability and superior lubricity, it…
Lubricating and cleaning oil for knitting machines, based on paraffinic hydrocarbons with very good penetration. Its low…
IllustrationISO VG 150 for faster-running, moderately loaded gearboxes, circulation or splash lubricated. Heavy-duty mineral gear oil, EP/AW…
IllustrationISO VG 320 for slow-running enclosed gearboxes under heavy and shock loads such as mill gears, circulation or splash lubricated…
IllustrationEster-based synthetic oil for low temperatures and long service life. Its viscosity changes less with temperature than that of…
Fully synthetic special grease based on SHC/ester oil with a polyurea thickener. Operating temperature range from -40 °C to +160…
IllustrationMultipurpose synthetic thin-film lubricating oil with good spreading properties. Its special formulation provides lubrication…
IllustrationSemi-synthetic water-miscible cutting fluid with low mineral oil content, specially designed for general-purpose machining of…
IllustrationFood-grade synthetic air compressor oil based on PAO and ester with a high-performance additive system, NSF H1 registered for…
IllustrationISO VG 32, pour point -66 °C, for cool-running screw compressors and vacuum pumps or units specified for VG 32. NSF H1 PAO air…
IllustrationISO VG 46, the common grade for oil-flooded screw compressors and liquid ring vacuum pumps in food plants. NSF H1 PAO air…
IllustrationISO VG 100 for reciprocating, vane or hot-running compressors needing a thicker film than VG 46; VI 171. NSF H1 PAO air…
IllustrationISO VG 150, the heaviest grade, for heavily loaded reciprocating and vane compressors or where VG 150 is specified. NSF H1 PAO…
IllustrationHigh-quality diester-based compressor cleaner combined with an additive system that allows it to be used as a short-term…
IllustrationISO VG 32 for ammonia and propylene refrigeration compressors at low evaporating temperatures or where a thin oil is specified…
IllustrationISO VG 100 for hot-running oil-flooded screw compressors on ammonia and propylene, or where a thicker film than VG 68 is needed…
IllustrationISO VG 32 for cool-running compressors, cold climates or units specified for VG 32. PAO compressor oil, high-performance…
IllustrationPAO-based synthetic air compressor oil, CPI's main line for oil-flooded screw, rotary vane and centrifugal compressors. Thermally…
IllustrationISO VG 68 for hotter-running compressors or high discharge temperatures needing a thicker film than VG 46. PAO compressor oil…
IllustrationISO VG 100 for reciprocating and vane compressors or units whose manual calls for VG 100. PAO compressor oil, high-performance…
IllustrationISO VG 150, the heaviest grade in the range, for heavily loaded reciprocating and vane compressors or units specified for VG 150…
IllustrationSynthetic compressor oil based on polyalkylene glycol (PAG), with high thermal/oxidation stability, very low volatility and a…
IllustrationISO VG 100, the lighter of the pair, for oil-flooded screw and reciprocating sour-gas compressors whose manual specifies VG 100…
IllustrationISO VG 150, the heavier of the pair, for hot-running or heavily diluted reciprocating and screw sour-gas compressors needing a…
IllustrationSynthetic compressor oil based on polyalphaolefin (PAO) with built-in seal protection technology, high oxidation stability, low…
IllustrationSynthetic multipurpose grease with polyurea thickener, for continuous operation from -30 to 180 °C and short-term up to 220 °C…
IllustrationSpecial PFPE-based grease with PTFE thickener and very high thermal and oxidation stability, for operation from -30 to 260 °C…
IllustrationHighly heat-stable ester oil that combines chain lubrication and cleaning, for operation up to 250 °C. The formulation helps…
IllustrationAdhesive EP grease based on mineral oil with Li / Ca complex soap thickener, for slow-running, heavily loaded rolling and plain…
IllustrationEster-based high-temperature chain oil developed specifically for the bending rods of continuous presses, for operation from -30…
IllustrationMultipurpose NLGI 0 grease with lithium soap thickener and mineral base oil. Suitable for lubrication in humid, wet or very dusty…
IllustrationNLGI 1, the softer grade, pumps easily through central lubrication systems and long lines. Multipurpose lithium soap grease on…
IllustrationNLGI 2, the standard grade for rolling and plain bearings greased by hand or grease gun. Multipurpose lithium soap grease on…
IllustrationNLGI 3, the stiffer grade, stays put in bearings prone to leakage or on vertical shafts. Multipurpose lithium soap grease on…
IllustrationHigh-performance, anti-wear, fully synthetic chain oil in aerosol form, developed specifically for lubricating chains and…
Six quick selection pages by machine and operating condition, with data per TDS and a form to reach an engineer.
By viscosity 32, 46, 68, base oil and compressor make.
By applicationBy the 120, 160, 200, 260 °C limits; chain oils up to 300 °C.
By applicationBy the n·dm speed factor and base-oil viscosity.
By applicationISO VG 150, 220, 320, 460; mineral, PAO, PAG, H1; hydraulic and circulating oils.
By applicationBy lubrication point in the plant, with audit documents.
By applicationPARATHERM NF, HE, CE by system temperature.
