Without a chart, lubrication depends on a few people's memory; when they leave, the plant loses the knowledge. Food audits also require proof of which lubricant is used where.
stenter treated; the plant has several machines of the same type, so the procedure had to be repeatable. Objective: clean the carbon deposits from the chain and guide rails of an 8-chamber stenter before switching to LUBCON TURMOFLUID 40 B chain oil, with a procedure that can be repeated on the other machines: mechanical cleaning, spraying the cleaning oil LUBCON TURMOWOODOIL MKP Cleaner at the chain's working temperature in several rounds, blowing with compressed air, then changing the oil. Read more →
Textiles · Dong Nai · 2017A Hop Tien engineer contacts you within 24 working hours to schedule.
Review every lubrication point in the plant, propose the right product for each one and rationalize the number of lubricants in use.
Sample the oil in service, analyze it in the laboratory, report the condition of the oil and the machine and recommend when to change.
Run the proposed product on the customer's own machine under a measured procedure before changing over the whole plant.
